********************************* read.me ***********************************
*                                                                           *
*                         PCI Multi Modem Adapter                           *
*                                                                           *
*                        M Modem Driver for Linux                           *
*                                                                           *
*                            V0.3.1/tellur2                                 *
*                                                                           *
*****************************************************************************
                 
         
Introduction:
=============

  Below are instructions for install linux driver. You must complie the source
code to generate mmodem.o and use insmod to load mmodem.o as module.


Contents of the Subdirectory:
=============================

configure	Configuration script
install.sh	The install script, do not run by hand
Makefile.in	Template for makefile to complie the source code
README		This file.
mmodem		This file used as rc.d script at booting
mmodem.c	The linux driver source code
px_reset.c	The reset utility source code
mmodem.h	The include header file


Installation and Short test:
===========================

1) Now enter the following commands at the Linux prompt. 
   Remember, Linux is case sensitive.

	# mount -t vfat /dev/fd0 /mnt    
	# cp /mnt/m-modem.tar /usr/local/src 
        (copy to current working directory, such as /usr/local/src)
	# cd /usr/local/src
	# tar xvf m-modem.tar
	# cd ./m-modem
	# ./configure
	# make
	# make install


2) After installation, running the below to test the driver
   (be sure that you have something like "kern.* /var/log/syslog" 
    in your /etc/syslog.conf for logging module messages):

	# insmod mmodem.o
	# lsmod
		Module                  Size  Used by
		iBCS                  131268   0
	------>	mmodem                 24312   0
		you can see the module is up! Congraturation :)

3) Finishing! You can reboot the system to have a new world!


Additional configure options:
============================

  The "configure" script can understand a few options, which
may be useful in some cases.

--with-bindir=x         Specify path for px_reset (default: /usr/local/bin)
--with-rcdir=x          Specify path for mmodem rc.d script
--with-libdir=x         Specify target path for mmodem.o module
--with-rclocal=x        Specify your rc.local init script (not for RedHat)
--disable-share-irq     Disable support for share irq
--enable-force-version  Force kernel headers version mismatch error
